H&H Roofing And Repairs

Hours: Mon - Fri 7am - 7pm | Sat 7am - 5pm

Lic. #CCC1333557

Flat Deck Repair & Install Melbourne FL

Flat and low-slope decks are a specialty, not an afterthought. A flat deck that ponds water, splits at the seams, or fails at the flashing needs a roofer who works these systems every week, not one who mostly does sloped shingle roofs. H&H Roofing repairs and installs flat decks on homes and businesses across Melbourne FL and Brevard County, built for Florida’s heat, rain, and hurricane wind. Licensed #CCC1333557 and insured. Call (321) 704-2174 for a free assessment.

Why Flat Decks Are a Different Discipline

Flat decks behave nothing like a sloped roof. Water does not run off, it sits, pools, and finds every weak seam and penetration. Add Florida's UV heat, torrential summer rain, and hurricane wind uplift, and a flat deck becomes one of the most demanding roofing systems to keep watertight. It takes the right membrane, correct slope to drainage, and clean flashing details to do it well. H&H Roofing has installed and repaired flat decks across Melbourne FL and Brevard County for over 30 years, on both residential additions and commercial buildings.

Finished white modified bitumen low-slope flat deck roof installed next to a shingle roof in Melbourne, FL

Flat Deck Systems We Install and Repair

We work with every major flat and low-slope system used across Brevard County. The right choice depends on your building, budget, and how the deck is used.

Created by Muhammad Zulkifly Suradinfrom Noun Project

TPO (thermoplastic polyolefin)

is a reflective white membrane that bounces Florida heat and welds into a seamless surface. It is an excellent choice for new flat deck installs, with a lifespan of 15 to 25 years.

Created by Muhammad Zulkifly Suradinfrom Noun Project

Modified bitumen (torch-down)

is a proven multi-layer asphalt system common on Melbourne FL flat decks. It is durable and repairable, with strong performance when seams and laps are properly sealed. Lifespan is typically 12 to 18 years.

Created by Muhammad Zulkifly Suradinfrom Noun Project

EPDM (rubber membrane)

is a long-lasting rubber membrane well suited to low-slope decks. Repairs focus on seam resplicing and flashing reattachment as the material ages.

Created by Muhammad Zulkifly Suradinfrom Noun Project

Fluid-applied membranes and roof coatings

are seamless liquid systems and reflective coatings that renew an aging flat deck and extend its life without a full tear-off, where the existing substrate is still sound.

Each of these services is handled by licensed, local professionals with deep experience in Florida’s roofing standards  and Brevard County’s building codes. Whether you need slight deck repair or a full system restoration, our specialists diagnose the problem at the source, ensuring your roof stays secure through every season. See the Roof Repair services we offer.

Flat decks fail at predictable points, and H&H Roofing inspects all of them on every assessment. Ponding water that stands more than 48 hours means the deck lacks slope to drainage, and constant ponding breaks down membranes and adds dangerous weight. Seam and lap failure is the most common leak point, as seams separate under UV and Florida’s heat cycling. Flashing pulls loose where the membrane turns up against walls and parapets. Drains and scuppers back water onto the deck when they clog or their flashing fails. Penetrations and HVAC curbs are constant movement points where flashing displaces. And heat-driven blisters and stress splits let water pool and enter at fracture points on older systems.

H&H Roofing and Repairs did an outstanding job repairing the flat roof over my sunroom. I was up against a tight deadline because of a homeowners insurance requirement, and they got the work scheduled and completed faster than I thought possible.

Joseph White

Home Owner

Why Brevard County Homeowners Choose H&H Roofing and Repairs

Local Expertise You Can Trust

Based in Melbourne FL with 30+ years serving the Space Coast, we understand Florida's roofing codes, materials, and the specific weather challenges every community in Brevard County faces.

Fully Licensed & Insured

Every project is backed by warranty and completed by certified roofers.

According to Angi, homeowners who perform preventative maintenance save an average of 25% on future roofing costs compared to full replacements.

Our Flat Deck Install & Repair Process

Every flat deck project follows the same disciplined process, whether it is a targeted repair or a full new install. We start with a free inspection and moisture assessment to find the true source and check the substrate below the membrane, then provide a detailed written proposal covering system options, drainage correction, and financing. On installs we build proper slope to drainage so water leaves the deck instead of ponding, and we detail the flashing and penetrations cleanly, which is the difference between a deck that lasts and one that leaks again. Every new install is finished with a final inspection and backed by our 10-year workmanship warranty.

Repair or Replace Your Flat Deck?

A localized seam or flashing failure on an otherwise sound deck is a repair. A deck that is ponding, blistered, and leaking in multiple spots is usually better served by a new membrane. Our free assessment tells you which makes economic sense for your building, and for commercial properties it ties into our broader commercial roofing services.

Close-up of rotted plywood roof decking at the shingle edge before flat deck repair in Melbourne, FL BEFORE
Finished composite flat deck surface against home siding in Melbourne, FL AFTER

Frequently Asked Questions (FAQ)

Does H&H Roofing repair and install flat decks in Melbourne FL?
Created by NAPISAHfrom Noun Project Created by NAPISAHfrom Noun Project

Yes. H&H Roofing repairs and installs flat and low-slope decks on homes and businesses across Melbourne FL and all of Brevard County. We work with TPO, modified bitumen, EPDM, and fluid-applied coating systems. Call (321) 704-2174. License #CCC1333557.

Targeted flat deck repairs typically run $500 to $2,500. A full flat deck install depends on the size, system, and drainage work required. H&H Roofing provides free assessments with detailed written proposals and financing options.

Ponding means the deck lacks enough slope to move water to the drains, or the drains are blocked. Standing water after 48 hours breaks down the membrane and adds weight. We correct slope and drainage as part of the repair or install.

There is no single best system, it depends on your building and budget. Reflective TPO is a strong choice for new installs in Florida heat, while modified bitumen and EPDM are proven, repairable options. We recommend the right fit at your free assessment.

Schedule a Free Flat Deck Assessment in Melbourne FL

H&H Roofing has installed and repaired flat decks across Melbourne FL and Brevard County for over 30 years. Licensed, insured, and experienced with every major membrane. We correct the drainage, seal the details, and back every new install with a 10-year workmanship warranty. Call (321) 704-2174 for a free assessment. License #CCC1333557.

Get $500 off any new roof of $10,000.

Void where prohibited. New customers only.